Product Information

Mach 1 SONIC HPX

 

Manufacturer: Mach 1 Packaging Ltd.

 

Model: SONIC HPX

 
 

$7,550 $7,990 $9,550 $9,990 Semi-automatic with pre-stretch; with enhanced controls; for standard load sizes and weights; for use with fork lift trucks

 

State: New

 

Type: Turntable

 

Structure: High Profile

 

Controls: Semi-Automatic

 

Film Carriage: Powered Pre-Stretch

 

Mach 1 SONIC HPX Pallet Stretch Wrapper

This is the flagship Mach 1 product, meeting the demand for a heavy duty, industrial rated, high profile turntable, semi-automatic, with pre-stretch, capable of wrapping industry standard load sizes (with oversize options), that is forklift portable (front and rear), and has a full array of available options (including a scale option) to meet any need.

AdvantagesDisadvantages
  • More robust turntable support system
  • Semi-automatic machine, does not require the active participation of the operator throughout the whole wrap cycle, allowing him/her to work productively elsewhere while the load is wrapped automatically
  • Pre-stretch film carriage maximizes the stretching of the film, significantly reducing the cost of packaging per load
  • Pre-stretch produces superior shipping package
  • Full array of available options accommodates needs for over-sized loads and wrap pattern variations
  • Fork lift portable
  • No air supply required
  • Minimal installation costs
  • Reduced maximum load wrap height capacity
  • Does not accommodate a loading ramp (i.e. fork truck loading only)
  • Requires operator to manually load the turntable, attach the film to the load, start the wrap cycle, cut and seal the film, and remove the load from the turntable
  • Load supporting turntable has maximum load weight limitations
  • May not be suitable for unstable loads which cannot accommodate rotation
 

Video IconClick here for the Mach 1 Packaging Videos page

Some videos specifically applicable to this model may be found below:

Mach 1 SONIC LPX - 240h, 3D.jpgSemi-automatic Turntable

Applicable to models:

 

Comments:

  • Typical / normal semi-automatic wrapping cycle
  • Demonstrates wrapping of load with various box sizes and uneven top layer
  • NOTE: no sound in video

Video Features:

  • Operator loading the machine wrap (aka. stretch film) into the film carriage
    [only required on first use or when film roll runs out and needs to be replaced]
  • Operator places the load on the turntable of the wrapper with a forklift truck
  • Operator attaches the leading film tail to the load
  • Operator starts the wrap cycle
  • Compete automatic wrap cycle demonstrated
    • begin rotation
    • wrap up
    • auto height photoeye detects top of load
    • top wraps
    • wrap down
    • stop limit detects bottom of load
    • bottom wraps
    • stop rotation at home position
  • Operator cuts film and wipes film tail to load

Mach 1 SONIC LPS - 240h, 3D.jpg"Gentle Cycle" Control Option

Applicable to models:

 

Comments:

  • Demonstrates "Gentle Cycle" control option, for very light or unstable pallet loads
  • Included at no extra cost in standard controls package
  • This delicate cycle provides a slower rotation of the turntable during the first half of the wrap cycle until the carriage reaches the top of the load and one layer of film is applied. The turntable then accelerates to high speed for the rest of the wrapping cycle
  • The slower rotation speed is user adjustable
  • If other loads are to be wrapped using a "normal" cycle, we recommend pairing this option with the "Independent settings switch for 3 load types" option which allows operators to quickly and easily select between different load wrap types with the flip of a switch
  • NOTE: no sound in video

Video Features:

  • Operator starts the wrap cycle
  • Compete automatic wrap cycle demonstrated
    • begin rotation at slower speed
    • wrap up
    • auto height photoeye detects top of load
    • one top wrap at slower speed
    • turntable accelerates to full speed
    • top wraps
    • wrap down
    • stop limit detects bottom of load
    • bottom wraps
    • stop rotation at home position

Standard Specifications

Performance:

  • Rotation Speed:
    - 0-16 RPM 
  • Loads Per Hour:
    - Up to 40 LPH
    - Dependent upon load characteristics, wrap pattern selection, loading method, and operator proficiency

Load Specifications:

  • Maximum Load Size:
    - 56" W x 56" L x 80" H
    - 1420 mm W x 1420 mm L x 2030 mm
  • Maximum Load Weight:
    - 5,000 lbs
    - 2265 kg

Mach 1 X-STRETCH Film Carriage

Film Delivery:

  • Mach 1 "X-STRETCH" pre-stretch film carriage
    - Easy thread
  • Pre-stretch:
    - 250% Factory default pre-stretch level
    - Other pre-stretch levels available
  • Post-stretch:
    - Electronic film tension control
  • Film Type:
    - Machine film
    - 20" roll width x 10" diameter
    - 508 mm roll width x 254 mm diameter

Rotation System:

  • Turntable Type:
    - Octagonal
    - Dimensions:
        - 48" x 48"
        - 1220 mm x 1220 mm
  • Mach 1 LP PRO-GLIDE TurntableTurntable Height:
    - From floor to top of turntable
        - approx. 9"
        - approx. 229 mm
  • Turntable Rotation System:
    - Chain driven
    - 1/2 HP
    - 90 VDC
    - Soft start/stop
  • Support:
    - PRO-GLIDE turntable support system with four (4) heavy duty turntable support casters

Mach 1 DIGI-TECH Control Panel

Controls:

  • DIGI-TECH control unit (Mach 1 675 CONTROL SYSTEM)
  • Operator Interface:
    - Membrane keypad with digital display
  • Wrap Programs:
    - Standard wrap up & down
    - Wrap up only
    - Bottom wraps first
    - Gentle cycle feature (for light or unstable pallets)
    - Reinforce wrap function
    - ... other advanced features
  • Operator Controls:
    - Cycle start
    - Pause cycle (and film enable)
    - Photo-cell
    - Carriage up and down jog
    - Value set (up and down)
    - Film force (tension)
    - Top and bottom wraps count, independent (1 to 10)
    - Carriage up and down speed, independent (1 to 100)
    - Jog turntable
    - Function access button
    - Emergency stop button (E-Stop), twist to release
    - On / off switch

Power Requirements:

  • Electrical:
    - 120 VAC
    - 15 A
    - Single Phase
    - 60 Hz
  • Pneumatic:
    - none

Lift System:

  • Film Carriage Lift:
    - Chain driven
    - 1/2 HP
    - 90 VDC
    - Soft start/stop

Cut and Seal:

  • Manual process, by operator

Construction:

  • Frame:
    - Welded steel
  • Portability:
    - Forklift lifting tubes, front and rear (Not shown on some documentation!)

Manufacturer's New Equipment Parts Warranty:

  • Better than industry standard
  • 3 years parts
  • 5 years workmanship
  • Lifetime warranty on pre-stretch rollers

Delivery: Shipping services or factory pick up are available. Production lead times vary according to season, model, and options chosen. Please contact us for details.

 

Attachment: Mach 1 SONIC HPX - Sales Brochure.pdf

 

Attachment: Wrapper Direct - Mach 1 SONIC HPX - Product Detail Sheet.pdf

 

Attachment: Mach 1 SONIC HPX - 1024w, 3D.jpg

 

Attachment: Mach 1 SONIC HPX - Split Base, Scale - 1024w, 3D.jpg

 

Attachment: Mach 1 SONIC HPX - Split Base, Oversize Turntable - WDI001 - 3D, 1024w.jpg

 

Attachment:

 

Product Options

  • Standard equipment options allow you to adapt the machine for oversize and heavier loads.
  • Other options allow you to streamline your production process and increase efficiency.
  • Custom options and modifications are available to meet specific needs.

Pricing for options is in CAD or USD.
Discounts off list pricing shown may be available.

Yes
Yes+ $650.00
Yes+ $850.00
Yes $0.00
Yes+ $225.00
Yes+ $550.00
Yes+ $750.00
Yes+ $1,550.00
Yes $0.00
Yes
Yes+ $550.00
Yes+ $450.00
Yes $0.00
Yes+ $950.00
Yes+ $1,550.00
Yes
Yes+ $3,990.00
Yes+ $3,990.00
Yes+ $1,095.00
Yes
Yes+ $475.00
Yes+ $155.00
Yes+ $850.00
Yes+ $195.00
Yes+ $975.00
Yes $0.00
Yes $0.00
Yes $0.00
Yes
Yes+ $275.00
Yes $0.00

 

* All products are designed for operation in a typical warehouse environment (dry, clean, heated).

Options may be available to adapt these machines for operation in other environments (eg. cold, wet, dusty, etc.).

Operation of these machines in conditions for which they were not designed might reduce the life expectancy of the machine and/or negate the warranty.